How to Add Hole Punch and Stapling Options to the Secure Print Queues

1. Open System Preferences

2. Go to "Printers & Scanners"

3. Highlight & double click "Secure_B&W_Print"

4. Select "Settings"

Screen Shot 2018-03-09 at 2.23.23 PM.png

5. Click on "Options"

6. Select "Output Options", choose "Staple Finisher V1", and select "OK"

Screen Shot 2018-03-09 at 2.19.04 PM.png

7. Select "Puncher Unit", choose "2/3 Holes", and select "OK"

Screen Shot 2018-03-09 at 2.20.39 PM.png

8. Go through steps again selecting "Secure_Color_Print" to add these selections for the color printer where applicable.

9. Both staple and punch options must be turned on before these options will show when printing.


 I found this article helpful. (1)

 

Leave a Response